FA-ACTIVITY-01, for NSQF-AUTOMOBILE level2(SSLC),Chassis

 FA-ACTIVITY 01

Unit name-Chassis

Activity Name-CHASSIS

Chassis:-

             "chassis is the basic or under part of motor vehicle consisting of frames with the wheels and machinery" and chassis is made by steel metal.

fig-Chassis

Classification of chassis:-

        1. Full forward

        2. Semi forward

        3. Bus Chassis

        4. Engine at front

        5. Engine at Centre

        6. Engine at rear

Classification of bus chassis:-

      1.  4x2 drive chassis-The vehicle have 4 wheels and out of 2 wheels are drive wheels.

      2.  4x4 drive chassis-The vehicle have 4 wheels and all the wheels are drive wheels. 

     3.  6x2 drive chassis-The vehicle have 6 wheels and out of 2 wheels are drive wheels.

      4.  6x4 drive chassis-The vehicle have 6 wheels and out of 4 wheels are drive wheels.

Classification chassis frame:-

        1. Conventional chassis frame

        2. Integral chassis frame

Classification chassis frame Sections:- (write with diagram)

       1. Channel section: Channel section is used for Long members.

       2. Box section: Box section is used for Short members.

       3. Tubular section: Tubular section is used for two wheelers, three wheelers,                                                        matadors etc. 

Loads on chassis:-

    1. Weights of passengers

    2. Weights of goods

    3. Braking loads

    4. Centrifugal force acting while turning.

    5. Weight of the components.

    6. Impact load

    7. Inertia load

    8. Static load

***(Note-

1.Students try to collect the picture from internet or photography from your surrounding area and attaché to activity.

2. Create a front page for the activity.)***