NSQF AUTOMOBILE SSLC Level 2 MCQ FROM OLD QP

NSQF - AUTOMOBILE  OLD QUESTION PAPERS MCQ FROM 2017-2020 (9SET) INCLUDING MODEL QP WITH ANSWERS




Four alternatives are given for each of the following questions / incomplete statements. Choose the correct alternative and write the complete answer along with its question number and alphabet :

    AUTOMOBILE LEVEL 2 SSLC ALL MCQ

1.  Channel is made of

    (A) Iron (B) Steel   (C) Wood  (D) Aluminum

 2. 6x4 drive chassis vehicle means 

    (A) Consists of 6 wheels out of which 6 wheels are the driving wheels.

    (B) Consists of 4 wheels out of which 4 wheels are driving wheels. 

    (C) Consists of 24 wheels out of which 6 wheels are driving wheels.

    (D)  Consists of 6 wheels out of which 4 wheels are driving wheels.

 3.  A chassis is made of 

    (A) Wood  (B)oil  (C) Metal  (D) Plastic

 4. “4 X 2” drive chassis vehicle means 

(A)  Consists of 4 wheels out of which 2 wheels are the driving wheels 

(B)  Consists of 4 wheels out of which 4 wheels are driving wheels 

(C)  Consists of 4 wheels out of which one wheel is a driving wheel 

(D)  Consists of 8 wheels out of which 2 wheels are driving wheels

 5. A chassis is used for 

    (A) carrying the bolt            

    (B) opening the load         

    (C) Fixing the auto body      

    

    (D) folding the nut

  6. The section of the steel frame used in matador is 

    (A) Tubular section   (B) channel section 

    (C) Box section         (D) square section


7.  6 X 2 drive chassis vehicle means 

(A)  Consists of 6 wheels out of which 6 wheels are the driving wheels    

(B) Consists of 6 wheels out of which 2 wheels are the driving wheels    

(C)  Consists of 12 wheels out of which 6 wheels are driving wheels 

(D) Consists of 2 wheels out of which 2 wheels are driving wheels

8.  Frictional horse power is equal to

    (A) F.H.P = I.H.P – B.H.P

    (B) F.H.P = B.H.P – I.H.P

    (C) F.H.P = B.H.P / I.H.P      

    (D) F.H.P = I.H.P / B.H.P

9. The component used to ignite the fuel in petrol engine is

    (A) Spark Plug    (B) Push rod     

    (C) Radiator        (D) Carburettor

10.  Fuel injectors are used in

    (A) Petrol engine   (B) Steam engine 

    (C) Diesel engine  (D) Jet engine

11. The compression ratio of diesel engine is

    (A)  8 to 16    (B) 16 to 22    

    (C) 8 to 9·5   (D) 6 to 8

12. The actual power delivered at the crankshaft is

    (A) brake horsepower               

    (B) indicated horsepower

    (C) friction horsepower           

    (D) horsepower

13. One horse-power is equal to

    (A) 9000 kg.m   (B) 5000 kg.m  

    (C) 6000 kg.m   (D) 4500 kg.m

 14. The unit of engine torque is

    (A) newton-metre square    

    (B) newton-metre

    (C) newton                          

    (D) newton-second

 15. The type of engine in which combustion takes

place outside the engine cylinder is 

    (A) steam engine  (B) diesel engine 

    (C) petrol engine     (D) jet engine

 

16. Distance travelled by the piston in moving from top dead centre to bottom dead centre is called 

    (A) bore           (B) compression ratio 

    (C) stroke      (D) engine capacity 

17. An example for liquid lubricant is

 (A) graphite              (B) grease

 (C) aluminium paste (D) vegetable oil

18. An example for solid lubricant is 

  (A) vegetable oil              (B) grease

  (C) oil mixed with water  (D) graphite

19. An example for synthetic lubricant is 

  (A) mineral oil                      (B) vegetable oil 

  (C) refined petroleum oil (D) animal oil

20. The lubrication oil should be chemically stable at

    (A) room temperature       

    (B) moderate temperature

    (C) higher temperature               

    (D) lower temperature

21.  An example for solid lubricant is

    (A) graphite               (B) grease   

    (C) mineral oil           (D) oil in water

22.  The resistance of the lubricating oil to flow is called

    (A) physical stability    (B) viscosity 

    (C) chemical stability   (D) flash point

23. Which is not the property of an ideal coolant ?

    (A) Corrosion       (B) High thermal capacity

    (C) Low viscosity    (D) Non-toxic

24. An example of semi-solid lubricant is

    (A)   mica          (B) oil in water  

    (C) soap stone  (D) aluminium paste

25. Coolant is used for

    (A)  heating the engine     

    (B) freezing the engine

    (C) cooling the engine   

    (D) firing the engine

26. Pump circulation system is used in

    (A) air cooling                        

    (B) liquid cooling 

    (C) pressure sealed cooling   

    (D) water cooling

27. Thermostat is placed between

 (A) carburettor and radiator     

(B) radiator and engine

   (C) engine and carburettor     

   (D) radiator and radiator fan

28. This is NOT the part of cooling system.

   (A) the radiator (B) radiator cooling fans     

   (C) bonnet         (D) water pump

29. Which of the following is not a part of the cooling system ? 

    (A) Water pump     (B) Thermostat    

    (C) Freeze plug      (D) Spark plug

30.  In automobiles the following types of universal joints are not used 

    (A) Cross type        (B) Non-rubber coupling 

 (C) Pot type joints  (D) Constant velocity type

31. The type of gear used in final drive is

  (A) hypoid gears            (B) spiral bevel gears

  (C) straight bevel gears (D) spur gears

32. Automatic transmission system is mainly used in which of following vehicles?

    (A) Luxury cars        (B) Light vehicles  

    (C) Two wheelers     (D) Three wheelers

33. A stub axle is used for 

    (A) tightening the bolt      

    (B) opening the nut

    (C) rotating wheel            

    (D) folding the nut

34. Stub axle without rigid axle beam type is widely used on

    (A) cars                               

    (B) trucks   

(C) heavy commercial vehicles    

(D) buses

35. The component that supports the weight of the vehicle is

    (A) strut rod   (B) strut  

    (C) spring     (D) ball joint

36. Tendency of a vehicle to dive in its front on application of brake is called

    (A) yawing      (B) dipping  

    (C) bottoming (D) unsprung weight

37. Function of suspension system is to

    (A) Reduce friction                          

    (B) Reduce wear and tear    

   (C) Reduce shocks and vibration  

    (D) Reduce speed

38. Rolling resistance depends upon

    (A) mass of the vehicle              

    (B) body profile of the vehicle 

    (C) acceleration and its rate       

    (D) materials of the road surface

 

39. Rolling resistance depends upon

    

    (A) slope of the road             

    

    (B) materials of the road surface

    

    (C) speed of the vehicle 

    

    (D) constant speed            


40. The component that supports the weight of the vehicle is

    

    (A) strut rod   (B) strut 

  

    (C) spring       (D) ball joint

41.Tendency of a vehicle to dive in its front on application of  brake is called

    (A) yawing              (B) dipping   

    (C) bottoming         (D) unsprung weight

 42. The function of ignition coil is to change voltage from

    (A) 10 volts dc to 20,000 volts dc   

    (B) 10 volts dc to 18,000 volts dc

    (C)12 volts dc to 22,000 volts dc  

    (D) 12 volts dc to 18,000 volts dc

 43. The correct relationship between power (W), voltage (V) and current (I) is

    (A)   I =V / W      (B)  I/V =W      

    (C)  V =I / W       (D)  VI=W

44.   The unit of resistance is

    (A) ohm         (B) ampere         

    (C) volt          (D) watt.

 45. The part which is fitted into the charging circuit of auto electric system is 

    (A) alternators    (B) cut-out unit    

    (C) ignition coil      (D) spark plug

 46. The unit of power is

    (A)   ohm         (B) volt     

    (C) ampere      (D) watt

 47.  The colour of the fog lamp is

    (A) amber      (B) green         

    (C) red             (D) white

48.  The hand tool used for cutting, shearing and chipping of metal is

    (A) pliers   (B) snips   

    (C) files     (D) chisels

49.The instrument used to measure the specific gravity is        

    (A) Hydrometer      (B) tachometer      

    (C) volt-ohmmeter    (D) wattmeter

50. The tool used to tighten and loosen bolt and nut is 

    (A) hammer         (B) hand hacksaw     

    (C) spanner       (D) bench vice

 51.The tool used to precisely apply a specific torque to a bolt and nut is

    (A) tappet wrench     (B) wheel wrench  

   (C) torque wrench  (D) flywheel puller

52. The machine used in automobile service centre to prevent tyre vibration and bounce is

    (A) air compressor             

    (B) two-post lift           

   (C) pneumatic wrenches   

   (D) wheel balancer

53. Flywheel puller is a/an 

    (A) special tool        (B) hand tool    

   (C) electrical tool    (D) measuring tool

54.  Mallet is made of

    (A) iron        (B) wood       

    (C) steel       (D) aluminium

55. ‘File’ is a/an

    (A) electrical tool    (B) hand tool     

   (C) special tool        (D) measuring tool

56.  The hammer made of rubber or wood is  

    (A) punch   (B) grease gun   

    (C) mallet   (D) snips

 57. Calipers is a/an

    (A) electrical tool  (B) special tool   

   (C) hand tool         (D) measuring tool

58. The part of the vehicle cleaned by news paper is

  (A) brakes     (B) doors     

  (C) axles        (D) windows

59. When a vehicle travels 50,000 KM usually this is recommended

    (A) Air Filter change   (B) Oil change    

    (C) Fuel change              (D) Battery change

60.  The part which is used to keep the inside of the engine free from dust and insects is 

    (A) fuel filter     (B) coolant filter       

   (C) air filter    (D) oil filter

61. Which of the following material tools is not used for changing the fuel filter?

    (A) Safety Glasses     (B) Coolant  

    (C) Container            (D) Screw Driver

62. Which of the following tools / material is not used for changing the coolant in engine?

    (A) Pan         (B)Coolant   

    (C)Spanner  (D)Car Jack and Jack stands

63.Vehicle air filter should be changed after 

    (A) every 40,000 km         

    (B) every 30,000 km   

   (C) every 45,000 km       

    (D) every 50,000 km

64. Air filter is made

    (A) Iron         (B) Steel         

    (C) Wood       (D) Paper

65. As per general rule the vehicle coolant is changed after

   (A) three years   (B) four years    

   (C) five years     (D) two years

66. In an automobile incorrect oil level can cause serious damage to

    (A) vehicle body               

    (B) vehicle tyres  

    (C) vehicle engine            

    (D) vehicle steering system            

67.Which of the following materials / tools is not used for changing the air filter of an engine ?

    (A) Drain plug socket wrench       

    (B) New air filter    

    (C) Phillips screw driver                 

    (D) Flat screw driver

68. The tool used to check the oil level in the engine is

    (A) Hammer     (B) Dip stick      

    (C) File             (D) Drill bit

69.  Usually vehicle washing is done by

    (A) chemical     (B) wood       

    (C) iron            (D) water

70.  Air filter is made of

    (A) iron           (B) wood            

    (C) steel          (D) paper

71. In vehicle cleaning, the windows are cleaned by

    (A) plastic     (B) newspaper     

    (C) rubber     (D) wood

 72. Vehicle air filter should be changed after the distance

    (A) 50,000 km  (B) 25,000 km   

    (C) 75,000 km     (D) 45,000 km

73. While changing the engine oil of a car, car is parked at

    (A) engine on and parking brake on             

   (B) engine off and parking brake off

   

    (C) engine on and parking break off             

    

    (D)  engine off and parking brake on

 

 74.  Air filter is cleaned by


    (A) chemicals   (B) air blower   


    (C) oil               (D) water

75. The part of the vehicle cleaned by newspaper is

    (A) doors        (B) axles     

    (C) windows     (D) breaks

76. Change of air filter is generally recommended when a vehicle travels a distance of

 

    (A) 50,000 km  (B) 60,000 km  

    

    (C) 30,000 km     (D) 20,000 km

77. Vehicle oil should be changed after the vehicle travels the distance of

    (A)  minimum 4,000 km — maximum 15,000 km

    (B)  minimum 15,000 km — maximum 30,000 km

    (C)  minimum 25,000 km — maximum 30,000 km       

    (D)  minimum 30,000 km — maximum 35,000 km

 

78. The material(s)/tool which is/are NOT used for changing the engine oil and oil filter is/are

    (A) engine oil               (B) paper, towel and a rag   

   (C) carjack and stand  (D) coolant

79.The material(s)/tool which is used for changing the coolant is

    (A) Pan                                     

    (B) Phillips screw driver 

   (C) Paper towel and rag           

    (D) Drain plug socket wrench

80.  Side walls of the car tyres is cleaned by

    (A) wire brush         (B) files    

    (C) plastic brush  (D) iron brush

81. The tool used for measuring the oil level in the engine is

    (A) Phillips screw driver           

    (B) dip stick      

   (C) flat screw driver                 

    (D) compressor air valve

82. Thermal imaging cameras are used in the following innovations of car safety technology

    (A) Night vision assist              

    (B) Sensitive air bag system

   (C) Blind spot detection         

    (D) Rollover prevention

83. Passive keyless entry system was first designed by

    (A) Tata Motors    

    (B) General Motors

   (C) Ford Motors   

    (D) Maruti Suzuki Motors

 

 

 

 

 


Comments

Popular posts from this blog

NSQF KARNATAKA Question papers links and Key answers

Chassis - Automobile chassis

NSQF IT /ITeS SSLC LEVEL 2 karnataka MCQ-old question paper MCQ with answers